力学与工程科学系2019-2023年科研成果情况
发布时间：2024-10-28一、 概况
1. 2019-2023年，获得省部级科技奖励4项；授权发明专利27件；
2. 出版学术专著3部。发表学术论文360余篇，部分成果发表在力学、物理、材料和工程领域的顶级期刊上：
—— JMPS、JFM、CMAME、IJP、Int. J. Heat Mass Trans.、力学学报
—— PRL、PoF、PNAS、Matter、ACS Nano、物理学报
—— Mater. Sci. Eng: R、AM、AFM、CST、Comp. Part A、Acta. Mater.
二、 科技奖励：
1. 航空复合材料关键结构件高精度纤维铺放制造关键技术及应用安徽省科学技术一等奖 J-2022-1-059-D7 2023年08月
2. 碳纤维复合材料高精度缠绕设计与成型关键技术及应用 中国复合材料学会科学技术二等奖 20220201-R01 2022年11月
3. 超大跨距薄壁型船舶创新开发与建造示范 中国产学研合作创新成果奖二等奖 20226063 2022年12月
4. 严酷环境高铁相高抗蚀胶凝材料制备及其工程应用开发 中国建筑材料联合会.中国硅酸盐学会建筑材料技术发明一等奖2021-F-1-01-R08 2021年11月
三、 学术论文：
近五年学位点代表性论文清单
序号 | 论文名称 | 刊物、会议名称 | 发表 年份 | 本学位点 主要作者 | 国际合作 |
1 | Fracture toughness of thermoelectric materials | Materials Science and Engineering: R: Reports | 2021 | 李国栋 | 是 |
2 | Nanotwin-induced ductile mechanism in thermoelectric semiconductor PbTe | Matter | 2022 | 李国栋 | 是 |
3 | Stacking fault-induced strengthening mechanism in thermoelectric semiconductor Bi2Te3 | Matter | 2023 | 李国栋 | 是 |
4 | Synergetic Enhancement of Strength-Ductility and Thermoelectric Properties of Ag2Te by Domain Boundaries | Advanced Materials | 2023 | 段波 | 是 |
5 | Dense dislocations induced ductile SnTe thermoelectric semiconductor over a wide range of temperatures | Journal of Materials Science & Technology | 2022 | 段波 | 否 |
6 | Mn-In-Cu共掺杂优化SnTe基材料的热电性能 | 物理学报 | 2021 | 段波 | 否 |
7 | Pressure induced convergence of conduction bands in Al doped Mg2Si: Experiment and theory | Journal of Materiomics | 2019 | 段波 | 否 |
8 | A Physical Model of Nanotwin Unit and Orientation Organization for Designing Mechanical Performance: Cases of InSb, GaAs, ZnS | Advanced Functional Materials | 2023 | 李国栋 | 是 |
9 | An integrated system of sinusoidal-corrugated plate heat exchanger and thermoelectric modules for wastewater heat recovery | Energy Conversion and Management | 2022 | 翟鹏程 | 是 |
10 | Micromechanical model for effective thermoelectric properties of thermoelectric composite containing ellipsoidal inclusions with interfacial resistances | International Journal of Heat and Mass Transfer | 2023 | 文鹏飞 | 否 |
11 | Performance of annular thermoelectric couples by simultaneously considering interface layers and boundary conditions | Applied Thermal Engineering | 2020 | 陈刚 | 否 |
12 | SiC@BaTiO3 core-shell fillers improved high temperature energy storage density of P(VDF-HFP) based nanocomposites | Composite Science and Technology | 2022 | 周令 | 否 |
13 | Sandwich-structured polymer nanocomposites with Ba0.6Sr0.4TiO3 nanofibers networks as mediate layer inducing enhanced energy storage density | Composite Science and Technology | 2021 | 周令 | 否 |
14 | Structural failure of layered thermoelectric In4Se3-δ semiconductors is dominated by shear slippage | Acta Materialia | 2020 | 翟鹏程 | 是 |
15 | Dramatically reduced lattice thermal conductivity of Mg2Si thermoelectric material from nanotwinning | Acta Materialia | 2019 | 翟鹏程 | 是 |
16 | Enhanced thermoelectric performance of Te-doped skutterudite with nano-micro-porous architecture | Scripta Materialia | 2019 | 翟鹏程 | 否 |
17 | The thermoelectric and mechanical properties of Mg2(Si0.3Sn0.7)0.99Sb0.01 prepared by one-step solid state reaction combined with hot-pressing | Journal of Alloys and Compounds | 2021 | 文鹏飞 | 否 |
18 | Microalloyed medium-entropy alloy (MEA) composite nanolattices with ultrahigh toughness and cyclability | Materials Taday | 2021 | 冯骁彬 | 是 |
19 | A model for photothermal conversion of graphene-filled nanocomposites under NIR irradiation | Smart Materials and Structure | 2020 | 李芳 | 否 |
20 | The effective elastic properties of chain-like structural particle-reinforced composites | Mechanics of Materials | 2020 | 李芳 | 否 |
21 | An analysis of flexoelectric coupling associated electroelastic fields in functionally graded semiconductor nanobeams | Journal of Applied Physics | 2021 | 褚亮亮 | 否 |
22 | Nonlinear analysis of functionally graded flexoelectric nanoscale energy harvesters | International Journal of Mechanical Sciences | 2020 | 褚亮亮 | 否 |
23 | Thermally induced nonlinear dynamic analysis of temperature dependent functionally graded flexoelectric nanobeams based on nonlocal simplified strain gradient elasticity theory | European Journal of Mechanics/A Solids | 2020 | 褚亮亮 | 否 |
24 | The asymptotic homogenization evaluation of effective mechanical property of the C/C-ZrC composite by the reconstruction technique | Composites Structures | 2023 | 刘立胜 | 否 |
25 | Grain size effect of FCC polycrystal: A new CPFEM approach based on surface geometrically necessary dislocations | International Journal of Plasticity | 2022 | 蒋茂圆 | 是 |
26 | Substrate elasticity and surface tension mediate the spontaneous rotation of active chiral droplet on soft substrates | Journal of the Mechanics and Physics of Solids | 2022 | 赖欣 | 是 |
27 | Multiphase large-eddy simulations of human cough jet development and expiratory droplet dispersion | Journal of Fluid Mechanics | 2022 | 赖欣 | 是 |
28 | Peridynamic Modeling of Brittle Fracture in Mindlin-Reissner Shell Theory | Computer Modeling in Engineering & Sciences | 2022 | 赖欣 | 是 |
29 | An immersed transitional interface finite element method for fluid interacting with rigid/deformable solid | Engineering Applications of Computational Fluid Mechanics | 2019 | 刘立胜 | 否 |
30 | Peridynamic Stress is the Static First Piola–Kirchhoff Virial Stress | International Journal of Solids and Structures | 2022 | 刘立胜 | 否 |
31 | 单轴压缩下Ti3B4的力学、电学性能及变形机制的第一性原理研究 | 物理学报 | 2020 | 李君 | 否 |
32 | A modified rate-dependent peridynamic model with rotation effect for dynamic mechanical behavior of ceramic materials | Computer Methods in Applied Mechanics and Engineering | 2022 | 刘立胜 | 否 |
33 | Effects of water on the mechanical properties of silica glass using molecular dynamics | Acta Materialia | 2019 | 梅海 | 是 |
34 | The effect of heating rate on sintering mechanism of alumina nanoparticles | Journal of the American Ceramic Society | 2022 | 梅海 | 否 |
35 | Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive | Journal of the European Ceramic Society | 2020 | 任琳 | 否 |
36 | High conductive graphene assembled films with porous micro-structure for freestanding and ultra-low power strain sensors | Science Bulletin | 2020 | 任琳 | 否 |
37 | Hygrothermal durability of glass and carbon fiber reinforced composites – A comparative study | Composites Structures | 2019 | 钟愉承 | 是 |
38 | 冲击波诱发含孔Mg-3Al-1Zn 合金位错形核及演化行为研究 | 力学学报 | 2022 | 徐爽 | 否 |
39 | The shock response and spall mechanism of mg-al-zn alloy: molecular dynamics study | Acta Mechanica Solida Sinica | 2022 | 徐爽 | 否 |
40 | Atomistic simulation on the nano-scale oxidation of Fe-Cr alloy surfaces and the diffusion behavior of oxygen | Chemical Physics Letters | 2023 | 徐爽 | 否 |
41 | Giant near-elastic deformation in novel porous Cu-Al-Mn shape memory alloys | Materials Letters | 2023 | 刘记立 | 否 |
42 | Hysteretic behavior and resilience analysis of a new self-centering buckling restrained braces | Soil Dynamics and Earthquake Engineering | 2023 | 黄维 | 否 |
43 | Adsorption behavior of carbonic acid on γ- dicalcium silicate surface from molecular simulations | Journal of the American Ceramic Society | 2022 | 吕林女 | 否 |
44 | Electrical Resistance and Capacitance Responses of Smart Ultra-high Performance Concrete with Compressive Strain by DC and AC Measurements | Construction and Building Materials | 2022 | 孙明清 | 否 |
45 | Investigation on expansion effect of the expansive agents in ultra-high performance concrete | Cement and Concrete Composites | 2020 | 吕林女 | 否 |
46 | Evolution of aluminate hydrate phases in fly ash-cement system under the sulfate conditions | Construction and Building Materials | 2020 | 吕林女 | 否 |
47 | The effect of superelastic strain on the damping capacity in columnar-grained Cu-Al-Mn shape memory | Journal of Alloys and Compounds | 2019 | 刘记立 | 否 |
48 | Simulation Analysis of Cylindrical Shell Cavity Noise with Melamine Foam Lining | Shock & Vibration | 2021 | 晏石林 | 否 |
49 | Multi-objective optimization of the fiber-reinforced composite injection molding process using Taguchi method, RSM, and NSGA-II | Simulation Modelling Practice and Theory | 2019 | 晏石林 | 否 |
50 | 树脂传递模塑成型工艺中嵌套效应引起渗透率变异的实验与数值模拟 | 复合材料学报 | 2021 | 晏石林 | 否 |
51 | 考虑界面效应的GFRP复合材料蠕变模型 | 复合材料学报 | 2021 | 朱四荣 | 否 |
52 | Bending performance of curved sandwich panels comprising GFRP face sheets and web cores: Experimental investigation and theoretical model | Thin-Walled Structure | 2022 | 陈建中 | 否 |
53 | Long-term ring stiffness of fiberglass-reinforced plastic mortar pipes | Materials Testing | 2021 | 陈建中 | 否 |
54 | Effects of graphene oxide on microstructure and mechanical properties of isotropic polydimethylsiloxane-based magnetorheological elastomers | Rheologica Acta | 2022 | 张江涛 | 否 |
55 | Experimental and modeling investigations on the quasi-static compression properties of isotropic silicone rubber-based magnetorheological elastomers under the magnetic fields ranging from zero to saturation field | Smart Materials and Structures | 2022 | 张江涛 | 否 |
56 | A magnetic field- and frequency-dependent dynamic shear modulus model for isotropic silicone rubber-based magnetorheological elastomers | Composites Science and Technology | 2021 | 张江涛 | 否 |
57 | Simultaneously enhancing the strength and toughness of short fiber reinforced thermoplastic composites by fiber cross-linking | Composites Science and Technology | 2022 | 钟愉承 | 是 |
58 | Environmental durability of carbon/flax fiber hybrid composites | Composite Structures | 2020 | 钟愉承 | 是 |
59 | Nonequilibrium thermodynamic modeling of case II diffusion in glassy polymers | Journal of the Mechanics and Physics of Solids | 2023 | 李旭 | 是 |
60 | Effect of temperature and strain rate on the tension response of uncured rubber: Experiments and modeling | Mechanics of Materials | 2020 | 李旭 | 否 |
61 | 基于内聚力理论的二维二次界面单元在ABAQUS中的UEL程序实现 | 计算力学学报 | 2019 | 李旭 | 否 |
62 | 多层氧化石墨烯的三维弹性常数及氧化度对力学性能的影响 | 固体力学学报 | 2022 | 文聘 | 否 |
63 | Heat Transfer Efficiency Enhancement of Gyroid Heat Exchanger Based on Multidimensional Gradient Structure Design | International Communication of Heat and Mass Transfer | 2023 | 文聘 | 否 |
64 | Mechanical behaviors of multidimensional gradient gyroid structures under static and dynamic loading: A numerical and experimental study | Additive Manufacturing | 2022 | 文聘 | 否 |
65 | Customizable fabrication for auxetic graphene assembled macrofilms with high conductivity and flexibility | Carbon | 2020 | 文聘 | 否 |
66 | Measurement of manufacture assembly stresses in thick composite components using a modified DHD method, Composites Part A | Applied Science and Manufacturing | 2020 | 胡海晓 | 是 |
67 | Experimental and numerical studies on the tensile behaviors of thin-ply and thick-ply open-hole laminates | Thin-walled Structures | 2023 | 胡海晓 | 是 |
68 | Measurement of manufacture assembly stresses in thick composite components using a modified DHD method | Composites Part A: Applied Science and Manufacturing | 2020 | 胡海晓 | 是 |
69 | 土壤水分布的孔隙尺度格子玻尔兹曼模拟研究 | 力学学报 | 2020 | 晏石林 | 否 |
70 | Topology optimization of Double-Double (DD) composite laminates considering stress control. | Computer Methods in Applied Mechanics and Engineering | 2023 | 钟愉承 | 是 |
73 | Experimental investigation of the whirl and generated forces of rotating cylinders in still water and in flow | International Journal of Naval Architecture and Ocean Engineering | 2020 | 陈威 | 是 |
76 | 单/双自由度旋转圆柱流致振动特性数值计算分析 | 船舶力学 | 2023 | 林永水 | 否 |
80 | 波导吸振器的低频减振设计和应用 | 力学学报 | 2023 | 林永水 | 否 |
83 | Dual-Phase Inspired Soft Electronic Sensors with Programmable and Tunable Mechanical Properties | ACS Nano | 2023 | 林永水 | 否 |
84 | Mechanical properties of a novel two-phase hybrid plate-lattice metamaterial | Mechanics of Advanced Materials and Structures | 2022 | 林永水 | 否 |
85 | Response of Topological Soliton lattice structures subjected to dynamic compression and blast loading | Thin-Walled Strucutre | 2023 | 曹晓飞 | 否 |